Event ID 1001 Error: Easy fix now! ⚡

Since Windows BSOD errors can be difficult to remember, users have found a way to recheck the error code through the Event Viewer.

He Event Viewer reports all errors that occur while using your computer. Many Windows users have reported an unusual error code in the Event ViewerThey claim that the Event Viewer sample Event ID: 1001 when your computer goes into BSOD or freezes.

Why do I get Event ID 1001 error?

Therefore, if an error appears Event ID 1001 in the Windows error report on your Event Viewer, you must first know why. Here is why the error appears Event ID 1001:

• • Insufficient free RAM 🧠

• • Third-party antivirus that conflicts with the security of Windows 🛡️

• • Corrupted system files 🔧

• • Virus/malware 🦠

• • High disk usage/low disk space 💽

So, these are some of the key reasons behind the Event ID 1001 from Windows Error Reporting.

How to fix Event ID 1001 error in Windows 🖥️🔧

Now that you know all the possible reasons behind the Event ID 1001 from Windows error reporting, you need to fix it. It's easy to resolve the error message. Here's what you can do:

1. Disable third-party antivirus software 🛑

As mentioned above, the error Event ID 1001 It usually appears when third-party antivirus software conflicts with Windows security. To resolve the issue, you can try disabling your third-party antivirus program.

If you are not using a software antivirus, you need to disable firewall applications. Third-party firewall programs also conflict with Windows security firewall, which leads to the error message. So, open your control Panel and look for your third-party antivirus software. Right-click on it and select Uninstall.

2. Scan for malware 🛡️🔍

Malware and viruses are other reasons behind Windows error reporting event ID 1001. Therefore, before following the methods below and after disabling your third-party antivirus programs, you should scan your PC for malware.

Now that you have disabled your antimalware programs from third parties, you should look for threats using Windows Security.

Here's how to run a full scan on Windows using Security Windows.

1. First, click on Windows search and type Windows Security.

2. When Windows Security opens, switch to the Protection against viruses and threats eyelash.

3. On the right side, click on the Scanning options.

4. On the next screen, select Full Scan and click Scan Now.

Now, Windows Security will check all the files and programs that are running on your hard drive. 🖥️

This scan may take over an hour to complete.

3. Monitor and close suspicious apps in the background 🔍

Few applications can trigger the event BSOD ID 1001. 🛑

Applications that frequently trigger reporting Windows ID errors 1001 They are usually malicious and run silently in the background.

Therefore, you should open the Task Manager on your Windows and keep a close eye on all the running applications. 👀 If you find any application that should not be running on your device, right-click on it and select the option End task. ❌

To prevent them from running on your computer again, open the Control Panel and delete the application 🗑️.

Alternatively, you can disable the app from starting automatically.

To do this, I opened Task Manager > Startup 🛠️.

Find the application, right click on it and select Deactivate ❌.

4. Update outdated drivers 🚀

Outdated drivers are another major cause of Event ID 1001 error in Windows 🖥️.

In this method, you need to find and update all the outdated drivers installed on your device 🔄.

Here's how to update outdated drivers in Windows (#) 👇.

1. Write Device Manager in Windows Search. Then open the app Device Manager from the list of best results.

2. The Device Manager will open. You need to check for problematic device drivers, which will mostly have a yellow exclamation mark.

3. Right click on those problematic devices and select Update driver.

4. On the How do you want to search for drivers? message page, select Search for drivers automatically option.

5. Increase virtual memory allocation 🖥️💾

Windows uses a paging file, which is a section of the hard drive that the operating system uses as if it were additional RAM. Sometimes, a low amount of virtual memory can trigger the error with Event ID 1001 in the Event Viewer.

To solve this problem, it is necessary to increase the allocation of virtual memory in your Windows operating system. Here's how to do it! 🚀

1. First, click on Windows search and type Adjust the appearance. Next, open the Adjust the appearance and performance of Windows app from the list.

2. In the window that appears, switch to the Advanced tab and then click the Change button below the Virtual memory.

3. In virtual memory, uncheck the 'Automatically manage paging file size for all drives' checkbox. Then select Custom size.

4. You should look at the details in the 'Total paging file size for all drives' section. Considering that detail, you need to increase the virtual memory allocation on your PC by configuring the values in the 'Initial size' and 'Maximum size' boxes.

5. After making changes, click the OK button.

6. 🧹 Run the Disk Cleanup utility

🛑 The error message may also appear when your PC runs out of storage space 📉.

The best way to solve storage problems is to use the Disk Cleanup Utility.

Here's how to run it on [Windows](#).

1. First, click on the search for Windows and type Disk Cleanup. Then open the Disk Cleanup Utility from the list of matching results.

2. In the Disk Cleanup message, select your installation unit of the operating system and click on the OK button.

3. Now, the utility will return with the files you can delete. Select all files and click on the OK button.

4. You will see a confirmation message. Click the Delete Files button to confirm your selection.

7. Run the application in compatibility mode 🛠️

If you can discover the app exact one that triggers the BSOD, try running it in compatibility mode. Here's how to do it in Windows 11.

Important: We have used Google Chrome to demonstrate what you need to do. Follow the steps to get the app to trigger BSOD on your PC. ⚙️

1. Right click on the Google Chrome browser and select Properties.

2. In Chrome Properties, switch to Compatibility eyelash.

3. Next, check the Run this program in compatibility mode to option in the Compatibility Mode section.

4. Select a version of Windows lower than the one you are using.

5. After making changes, click Apply and close Chrome Properties.

Be sure to restart your computer after making changes.

8. 🛠️ **Run the SFC command**

As we mentioned before, the error with event ID 1001 also appears due to system files damaged. 🖥️

So, if the error message is still displayed in the Event Viewer, you need to run the SFC command. 🔧

Here's how to perform an SFC scan on Windows.

1. First, click on the Windows search and type Command Prompt. Right click on the command prompt and select Run as administrator.

2. When the command prompt appears, enter the given command:

DISM.exe /Online /Cleanup-image /Restorehealth

3. Once this is done, run the SFC command at the command prompt:

sfc /scannow

FAQ 🤔

What does error code 1001 mean? 🛠️

He Event ID 1001 error indicates that there is a problem due to high use of resources system or conflicting applications. Additionally, corrupted system files can trigger this error. 💻

Is Event ID 1001 error triggered due to malware? 🦠

Although malware cannot directly cause the error or show you the Blue Screen of Death (BSOD), it can sometimes be responsible for it. Malware can damage important system files and increase resource consumption, which can lead to this error. 🚫

Does Event ID 1001 require a clean install of Windows? ❌

No! If you have followed all our shared methods, you will not have to perform a clean installation. It is very likely that the troubleshooting that we share resolve the error. ✅

These are the best methods to correct the event ID error 1001 on WindowsIf you need further help to resolve the error, please leave us a comment. Also, if you found the article helpful, please share it with your friends! 📤