Replace Hard Drive With SSD

Replacing a hard drive with an SSD

Replace Hard Drive with SSD – Increase Speed

Replacing a hard drive with an SSD – How to replace a hard drive with an SSD in a notebook and increase speed

🔍💻 SSDs are one of the best hardware upgrades thanks to their many advantages over mechanical hard drives, which dominated storage for years. In this guide, you'll learn how to replace a hard drive with an SSD in a notebook, improving performance. performance and/or storage capacity.
You can also install an SSD in a desktop computer, either as a single drive or in a hybrid system: SSD for the operating system and main applications, and HDD (or several in RAID) for mass storage. Even an older computer can be “revived” with this upgrade.

📌 Before you begin:

• 💾 Back up your data.
• ⚡ Turn off and disconnect the equipment from the power.
• 🖐️ Discharges static electricity (ESD).
• 🛡️ Check compatibility and possible warranty implications.

1.- Select and obtain the SSD

En notebooks lo ideal es un módulo M.2 PCIe si es compatible, ya que ofrece mejor rendimiento, menor consumo y peso, además de dejar libre la bahía de 2,5″ para más almacenamiento. Si eliges una SSD de 2,5″, fíjate en el espesor (normalmente 7 o 9 mm). En M.2, prioriza PCIe-NVMe frente a SATA. La capacidad dependerá de tus necesidades: desde modelos económicos de 120/240 GB, hasta opciones de 500 GB o 1 TB. Marcas como Samsung, Kingston, WD, SanDisk o Crucial ofrecen garantía y buen desempeño en formatos 2,5″ y M.2.

2.- Store the data

If the HDD is faulty, remove it and use specialized tools on another computer to attempt to recover data. If the HDD is working, before replacing it you can:

🔄 Clone the entire drive to preserve your system, applications, and settings. Many SSD manufacturers include software for this.
💽 Use manufacturer's restoration discs.
📦 Use built-in or third-party backup tools.
📂 If you're doing a clean install, save your personal files to external media or the cloud.

3.- Mount the SSD

With your data safe and your installation media ready:
1️⃣ Remove peripherals, power cable and battery if it is removable.
2️⃣ Access the interior of the laptop by removing the cover or panel, depending on the model.
3️⃣ Locate the HDD bay or M.2 slot.
4️⃣ If it's a 2.5″ SSD, remove the HDD and place the new drive in the same bay.
5️⃣ If it's M.2, remove the screw, insert the SSD, and screw it back in.
6️⃣ Mount the cover, connect the battery, power cable and peripherals.

4.- Configuration, system installation and data

If you're keeping both an HDD and an SSD, set the SSD as the first boot device in the BIOS/UEFI. – If you cloned the drive, simply boot it and verify that everything works. – If not, install the operating system and applications, and restore your files. Enable SSD-specific features like TRIM and prevent defragmentation. Manufacturers often offer software to optimize performance, check health, update firmware, and encrypt data.
✅ Any notebook An older HDD can significantly improve boot times, application launch times, and data transfer speeds by replacing an HDD with an SSD. This upgrade also applies to desktops, whether as a single drive or in hybrid systems.